Sodium chlorite 25% - 140ml individual

Sodium chlorite is used together with an activator to make chlorine dioxide. For sodium chlorite activation, citric acid or hydrochloric acid is used in a 1:1 ratio. 2 drops of sodium chlorite and 2 drops of activator for each liter of water to be treated.

Sodium Chlorite (NaClO2) is very useful for the treatment and disinfection of water for human and animal consumption. It is also very effective in cleaning rooms and disinfecting air ducts and other ventilation systems. Sodium chlorite should not be used alone and should always be activated with an activator.

Chemical formula: NaClO2

Characteristics: Transparent yellow liquid.

Composition: Sodium chlorite 25%.

Complies with the UNE-EN 938:2016 STANDARD, on chemical products used in the treatment of water intended for human consumption

VARIABLES

SALES SPECIFICATIONS

UNITS

Sodium chlorite (NaCIO2) ≥300 g/l

Total alkalinity ≥3 g/l

Purpose of the product:

Chlorine dioxide precursor in water treatment for human consumption.

Directions for use and recommended doses:

Drinking water treatment:

The treatment dose depends on the composition of the raw water. Appropriate measures should be taken to avoid exceeding the maximum permissible concentration of chlorine dioxide at the point of use, which generally depends on local regulations.

Additional analytical control: Trihalomethanes (THMs), ensuring that the values ​​at the consumer delivery points are lower than the parametric values ​​(VP) defined in RD 3/2023, 700 µg/L for chlorites.

The product is applied using a chlorine dioxide generator.

Consult the product safety data sheet for information on safety precautions in handling the product.

Incompatibilities with other products and/or materials:

Incompatible with acids, reducing agents, combustible material.

Consult the product safety data sheet for more information.

This information corresponds to the current state of our knowledge and is provided in good faith. However, it is the user's responsibility to ensure that the product is appropriate for the particular use for which it is intended and is handled in accordance with applicable local and national legislation.